Seller inspection guide

Seller inspection guide: answer heating-cost questions with evidence

· Taylor Tech journal

← All updates

A Northern Ireland seller’s guide to separating useful heating and hot-water evidence from estimates, promises and safety claims.

Dated Northern Ireland context: household advice is not a property forecast

On 23 October 2026, the Consumer Council for Northern Ireland launched its Switch On to Savings campaign as winter energy costs rose. On 28 October, NI Water reminded households that hot-water habits affect both water and energy use. These are useful current reminders for occupants, but neither establishes what a future owner will pay in a particular home. Sellers should present them as dated household guidance, not as proof that a property is cheap to heat.

Build a factual handover

Record the heating fuel, boiler and hot-water arrangement, accessible controls and any secondary appliances. Gather service records, repair invoices, manuals and warranty information already held, checking that personal details are not passed on unnecessarily. If you provide historic fuel or energy information, label the period clearly and avoid turning one household’s use into a prediction. Weather, tariffs, occupancy and habits can all change the result.

What a pre-sale inspection can add

Taylor Tech’s pre-sale health check is a narrower visual and basic operational review of accessible systems. It can record visible condition, appropriate normal-operation observations, photographs, limitations and recommended actions on the visit date. That can help a seller answer focused questions, decide what to investigate and keep later repair evidence together. It does not guarantee a sale, a higher price, lower bills or acceptance by a buyer’s surveyor.

Keep condition, efficiency and safety separate

HSENI’s evergreen Northern Ireland guidance says fuel-burning appliances should be properly installed and serviced by competent people, with chimneys and flues inspected annually and swept if required. It also describes a carbon-monoxide alarm as a back-up, not a substitute for proper installation and maintenance. A condition inspection is not a boiler service, flue-gas analysis, energy assessment or statutory safety certificate. Any required specialist work must be arranged separately with an appropriately competent person.

State the inspection limits clearly

A condition inspection is non-invasive and complements a general building survey. It does not open walls or floors, dismantle appliances, move heavy equipment or deliberately operate unsafe equipment. Concealed, intermittent and developing faults may remain undetected, and findings cannot guarantee safety, compliance or future performance. Before the visit, provide reasonable access to the boiler, controls and other agreed areas, disclose known recurring problems and agree the exact scope. Keep the final report with records of any subsequent work.

Make an enquiry
Make an enquiry